Expert Answers about Trailer Cargo Organizers

• Wiring and Is a Hitch Support Strap Required for the Draw-Tite Trailer Hitch on a 2012 Honda CRV
• Draw-Tite Does not require the use of a stabilization strap with non-trailer loads such as a bike rack or cargo carrier on their hitches like part # 75742. It might be a good idea to use one though if you are loading a bike rack or cargo carrier close to the tongue weight capacity of the hitch, vehicle or bike rack/cargo carrier, whichever is rated lowest Curt requires the use of a stabilization strap, # 18050, for any non-trailer loads such as a bike rack or cargo carrier. The strap...
  view full answer...


• Trailer Hitch Recommendation for 2013 Toyota Prius to Use with Cargo Carrier
• You are correct that the main difference between Draw-Tite and Hidden Hitch is that Hidden Hitch included the recommended drawbar and pin and clip. Draw-Tite and Hidden Hitch's parent company, Cequent, has phased out the Hidden Hitch brand, so for your 2013 Toyota Prius, you will want the Draw-Tite Class I Sport Frame Receiver Hitch # 24847 I highly recommend this trailer hitch for you to carry your cargo carrier. The Draw-Tite trailer hitch will not require any drilling or welding for...
  view full answer...


• Best Trailer Hitch To Use with Cargo Carrier and Bike Rack on a 2019 Chevrolet Equinox
• We currently have two class III trailer hitch options for a 2019 Chevrolet Equinox (Excluding Diesel), the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76419 and the Curt Trailer Hitch Receiver part # C13307. I recommend the Curt hitch because only the receiver tube portion is shown which makes for a much cleaner look once installed. I have attached a photo of this for you as well as a sample install video. If you don't already have a bike rack or cargo carrier, the Yakima EXO Swing...
  view full answer...


• Cargo Tie Down Recommendations for 5x8 Enclosed Cargo Trailer
• Between the three cargo tie-down anchors you referenced, parts # RR2K, # RR8K and # RR09, I would go with the # RR2K because it includes the reinforcing backing plate and because it offers you the choice of recessed or surface mounting. Since your cargo items just need to be secured inside the trailer, but not have their full weight held, these items should be fine. I can offer you another option to consider, one that might better suit the trailer and cargo items, but that will be up to...
  view full answer...


• Comparing Timbren Suspension Enhancement TGMRASTBHD vs TGMRASTB for 2003 Chevy Astro Van
• The Timbren Rear Suspension Enhancement System # TGMRASTBHD is designed for cargo vans and the # TGMRASTB is designed for passenger vans. The capacity is the big difference because they are both designed for vehicles with steel rear springs. It sounds like you have a passenger van that you use to carry cargo, so if that is the case, I recommend the # TGMRASTB for your application. If instead is a cargo van then use # TGMRASTBHD as the original design of the vehicle will play a huge part...
  view full answer...


• Best Trailer Hitch for a Cargo Carrier on a 2018 Toyota Yaris
• I recommend the Curt hitch, part # C11480, for your 2018 Toyota Yaris. Curt requires a support strap, part # 18050, when using a cargo carrier or any other non-trailer load. I've linked the install details of the hitch for you. It's a fairly straightforward process. You do need to remove some plastic rivets and trim off a plastic tab from the fascia.
  view full answer...


• Multipurpose Ball Mount with 2 Receiver for Cargo Carrier
• You can use your cargo carrier and tow a trailer with your Sea-Doos by using the Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers # D210. The ball mount will require a hitch ball with a 1" shank, so if you do not already use one you need either # C40002 for a 1-7/8" hitch ball or # 63845 for a 2" hitch ball. If you do not have a pin and clip to secure your ball mount you will need part # PC3.
  view full answer...


• Ability to Convert Surco Hitch Mounted Cargo Carrier to The Folding Model
• Yes, there is a hitch adapter extension, the Folding Basket Adapter for 2 inch Trailer Mounted Cargo Carriers, part # 52015, which will allow you to convert the regular Cargo Carrier, part # C618150 to a folding Cargo Carrier. This setup will work for you. If your cargo covers your vehicle lights, you could add the light kit like the etrailer License Plate and LED Tail Light Mounting Kit for Hitch Mounted Cargo Carrier Item # e98943-44LED. The carriers that you referenced are no longer...
  view full answer...


• Difference Between Carpod M2200 And M2205 Hitch Mounted Cargo Carriers
• We do carry the 23x47 Carpod Walled Cargo Carrier, part # M2205, and it has some great features. This cargo carrier has walls that fold flat and the entire carrier will fold up when not being used. The outside dimensions are 48-3/4 inches long x 24 inches wide x 22 inches tall, and it fits in a 2 inch receiver opening. This carrier weighs 54 lbs and it also features a shank with a 5 inch rise to provide a bit more ground clearance. The distance from the center of the hitch pin hole to the...
  view full answer...


• Comparing Curt Trailer Hitches for a 2009 Toyota Yaris 5-Door Hatchback
• Curt trailer hitch # C11480 actually will replace C11050. Hitch # C11480 is the newer design and the model I recommend for you due to slight design changes. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch. Curt also says you have to use stabilization strap # 18050 when using this hitch for...
  view full answer...


• What is the Difference Between Cargo Carrier 63154 and Cargo Carrier 63155
• The 20x47 Cargo Carrier for 1-1/4 inch (Class I and II Only) Trailer Hitches # 63155, required a little more assembly than the discontinued # 63154 did. Also, the # 63154 was only compatible with class II hitches, but the # 63155 can be used with class I or class II. The 63155 is the same carrier but it requires assembly, bolting together three parts. You may also need lights for the carrier if your load blocks the vehicle lights. Use Light Kit for Draw-Tite, Tow Ready, and Rola Railed...
  view full answer...


• Correct Trailer Hitch For A 2019 Volkswagen Jetta TDI
• My recommendation is the Draw-Tite Sportframe Trailer Hitch Receiver # 24978 which has a lower profile design, hiding the receiver tube. An additional consideration is difficulty of installation which is noticeably more here but is also part of how the hitch has a slimmer look. The Curt # C11540 while easier to install, will show the receiver tube as you can see from the installation instructions sample image provided. Both options are solidly made with quality materials that can handle...
  view full answer...


• Trailer Hitch Mount Cargo Carrier Recommendation for a 2008 Honda Pilot
• First, the 2008 Honda Pilot with the factory 2 inch trailer hitch or even an aftermarket hitch has the face of the receiver pretty much flush with the rear bumper. That is important because it means that most if not all carriers will clear the rear of the vehicle. The Curt carrier # C18150 would work well. Fixed carriers are sturdy because there are no additional pivot points on them. But when not in use the carrier will just be sitting back there and may cause clearance issues in some...
  view full answer...


• Comparing etrailer and Pro Series Trailer Hitch Cargo Carriers for a 2002 Honda Odyssey
• The etrailer cargo carrier # e98874, is the only one that can fold up. From the center of the hitch pin hole to the nearest part of the carrier is 9-1/2 inches when folded and 19-1/2 inches when in the down position. It fits a 2 inch trailer hitch receiver hitch only and has a 500 pound capacity. The 2" rise in the shank provides a little better ground clearance. It can be fitted with a light kit # e98943-44LED. This is the best all around carrier for your 2002 Honda Odyssey. Pro Series...
  view full answer...


• Comparing Weight Distribution Systems for Travel Trailer Weighing 9500-Lbs
• Selection of a weight distribution/sway control (WD/SC) system is based on matching the system's operating range to the fully-loaded trailer's actual measured tongue weight (TW). We offer a handy scale # e99044 to measure but other methods are outlined in the linked article. Any cargo in the tow vehicle that sits behind the rear axle, such as a loaded cooler or generator, also has to be added to the TW figure since this cargo will act just like trailer TW. Ideally your total TW load will...
  view full answer...


• Aluminum Trailer Hitch Mount Cargo Carrier for a 2002 Toyota Sequoia with 2 Inch Trailer Hitch
• We have a couple of aluminum trailer hitch mount cargo carriers that will both fit your 2002 Toyota Sequoia with the 2 inch trailer hitch. First, the Curt carrier you have referenced # C18100 is a fit. This carrier can fold up and when in the folded up position it will be 5 inches from the center of the hitch pin hole to the nearest edge of the carrier. To make sure it will fit when folded just measure from the center of your hitch pin hole straight back to the distance required to clear...
  view full answer...


• Comparing Curt and Reese Hitch Mounted Cargo Carriers
• The 24x60 Curt Cargo Carrier for 2" Hitches, part # C18152, and the 24x60 Reese Cargo Carrier for 2" Hitches, part # 63153, are extremely similar. In fact, in terms of the specs that you mentioned, neither stands above the other. I only recommend the Curt over the Reese because the rails are 3" taller, allowing you to have more options in what you can carry. As for foldable baskets, they are reliable. For example, the Curt Folding Carrier, part # C18151, has fantastic reviews from our...
  view full answer...


• Curt Class III and Class IV Hitch Comparison for 2018 Ford Transit T350 Passenger Van
• You are correct that we offer both Class III and Class IV 2-inch hitches for your 2018 Ford Transit T350 passenger van. If trailer towing were your intended application then the Class IV hitch # C14012 would definitely be my top recommendation since it can tow 2000-lbs more weight than the Class III model # C13193. But since your intended use is with a hitch-mount cargo carrier like # C18151 I recommend instead that you go with their Class III hitch # C13193 since it has a higher tongue...
  view full answer...


• Why Does Curt Trailer Hitch Receiver # C13073 For 2013 Kia Sorento Require Support Straps
• Although the trailer hitch itself will support non-trailer loads like bike racks and cargo carriers, this type of weight does put added strain on the hitch. In order to alleviate the leveraging affect that a non-trailer load places on the hitch, Curt likes to error on the side of caution and require the use of stabilizing/support strap, like part # 18050, to maintain their warranty. With this being said, I can not say that the Curt Trailer Hitch Receiver, # C13073, is of a lesser quality...
  view full answer...


• Curt or Draw-Tite Class II Trailer Hitch for 2020 GMC Terrain
• Between the Curt Trailer Hitch Receiver # C98CR and Draw-Tite Trailer Hitch Receiver # 36642 that fit your 2020 GMC Terrain, I would go with the Curt Trailer Hitch Receiver # C98CR These are very similar hitches, but the deciding factor here is that the Curt does have the significantly higher tongue weight capacity, 525 lbs vs. 350 lbs for the Draw-Tite. While this may not come into play often, it certainly can make a difference if you need to carry heavier cargo on a cargo carrier, for...
  view full answer...